What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

UV/IR flame detector X 5200

761349

Approval: VdS, FM, ATEX

The pressure-proof, fully enclosed combination ultraviolet/infrared flame detector, enables UV and IR sensors to monitor the same detection zone with a visual angle of 90?. Triggering occurs only by activation of the IR and UV sensors. A LED provides information regarding the state of operation, failure and alarm. Three relays (fire, failure and additional alarm) are integrated for connection to a fire detection system. Contamination resistance and heated optics to prevent condensation and formation of ice also allow for external operation.
Typical areas of application are turbines, munitions depots, natural gas depots and aircraft hangers.

Monitoring on the loop and resetting take place via the esserbus transponder 808623. Monitoring on a conventional line requires a reset module. This device requires a separate voltage supply of 24 V DC.

Features & Benefits
Technical Data
Accessories
Documents

Visual range: 90°
Maintenance with magnets, no test lamp required
Status display directly at the detector via 3-color LED for operation, fault and alarm
Actuation and resetting via esserbus transponder 808613.10 in loop operation

Additional Information:
Please note: for mounting of the holder, a 14 mm allen key is necessary and is not included in delivery.
If you intend to use the internal heater the current consumption raises to 583 mA @ 30 V DC.

Scope of Delivery:
Mounting bracket, 1 x metal EX cable gland

Display	max. 25 m
EC-type examination certificate	DEMKO 02 ATEX 132195
Operating voltage	24 V DC
Ex-category	II 2 GD
Explosion protection	EEx d IIC T5-T6, T86°C
Housing	Die cast aluminum
Weight kg	approx. 2.7 kg (+ 6.0 kg fixture)
Storage temperature	-55 °C ... 85 °C
Detector specification	EN 54-10, Class 1
Air humidity	< 95 % (non-condensing)
Type of protection	IP66
Angle of vision	max. 90°
Current consumption @ 24 V DC	approx. 117 mA
Height to be monitored	max. 20 m
Ambient temperature	-40 °C ... 75 °C
VdS class	F
VdS-Nr	G 203085
Dimensions	ø: 122 mm H: 246 mm

Albania	English (US)
Austria	German
Bosnia and Herzegovina	English (US)
Bulgaria	English (US)
Croatia	English (US)
Cyprus	English (US)
Czech Republic	Czech
Estonia	English (US)
Greece	English (US)
Hungary	English (US)
Kosovo	English (US)
Latvia	English (US)
Lithuania	English (US)
Macedonia	English (US)
Montenegro	English (US)
Poland	Polish
Romania	Romanian
Russia	Russian
Serbia	English (US)
Slovakia	Czech
Slovenia	English (US)
Turkey	Turkish
Ukraine	Russian

Europe

Business

UV/IR flame detector X 5200

761349

Features & Benefits

Technical Data

Accessories

Documents