UV flame detector UniVario

782311

Approval: VdS

UV flame detector for the recognition of fast developing fires with flame formation. Optical window of detector is constantly monitored for excessive contamination appearance. Operation, fault and fire statuses are displayed via LEDs on the detector. The supply voltage and the wiring take place directly via the standard detector zone at the esserbus transponder (Part no. 808623.10). Resetting of the detector is also carried out directly via the esserbus transponder (Part no. 808623.10).
  • Direct linking and voltage supply via standard detector group at the esserbus transponder (Part no. 808623.10)
  • Base installation and alignment via included mounting bracket (Part no. 783312)
  • High IP protection for indoor and outdoor usage
  • Operation and fault status displayed on the detector
  • Self-monitoring via internal sensors
  • Maximum level of response sensitivity according to EN54-10, Class 1

Additional Information:
Detector base and mounting bracket are not supplied!
Alarm current @ 9 V DCtyp. 15 mA
Number of Detectors per Zone1
Operating voltage9 V DC
CE certificate0786-CPD-20567
Colorred, similar to RAL 3000
HousingDie cast aluminum
Weight gapprox. 945 g (incl. base and bracket)
Storage temperature-40 °C ... 85 °C
Air humidity< 95 % (non-condensing)
Quiescent current @ 9 V DCapprox. 500 μA
Type of protectionIP67
Angle of visionmax. 90°
Area to be monitoredmax. 676 m²
Height to be monitoredmax. 45 m
Ambient temperature-20 °C ... 80 °C
VdS classF
VdS-NrG208131
DimensionsW: 130 mm H: 140 mm D: 92 mm