What is a User ID ?

A User ID is a user name and password that can be used to access several Honeywell Web sites.

Creating a User ID will simplify your Honeywell online application experience by allowing you to access Honeywell sites with a common username and password. You can choose your own username, password, and security questions; this will help make it easy to remember your account information.

Creating a User ID and Password

You must first provide some basic account information. All fields marked with an asterisk * or "Thumbs down/up" symbol are required and include an easily-remembered User ID, Password, First name, Last name, and Email address. To help protect your account, you must also provide three Security Questions and Answers. You provide the Password, Email address, and each Security Answer twice to help avoid accidental typos.

How to choose a User ID ?

Must be between 6 and 64 characters long
Cannot include the following symbols : @, &, ', <, >, !, ", /, #, $, %, +, ?, (, ), *, [ , ] , \ , { , }
Cannot contain spaces, tabs, or consecutive underscores, i.e. __
Cannot contain elements that imply an email address or URL, such as ".com", ".net", ".org", ".edu" or any variation (e.g. "_com" or "-com")
Cannot start with underscore '_', dash '-' or period '.'
Cannot contain the words "honeywell", "honey" or "allied"
Cannot contain single letter followed by numbers

Password Rules

Must be between 8 and 56 characters long
Must contain only characters from at least three of the following five categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Non-alphanumeric (for example: !, $, #, or %)
Cannot contain three or more consecutive characters from the User ID

Security Question Rules

Each security question must satisfy the following rules:

Must be between 10 and 50 characters long
Cannot be the same as any other security question
Should contain characters from at least three of the following categories:
- English uppercase characters (A - Z)
- English lowercase characters (a - z)
- Base-10 numeric digits (0 - 9)
- Character: question mark '?', single-quote ''', dash '-' or comma ','

Security Answer Rules

Each security answer must satisfy the following rules:

Must be between 3 and 20 characters long
Cannot contain any word in the question
Cannot be the same as any other security answer
Note: Security answers are not case sensitive.

Nitrogen Dioxide 5 to 50 ppm, Modbus RTU, Relay

XCL-LB-NO2-RM

VESDA Sensepoint XCL – Large Bore is a gas detection solution that utilizes the ASD pipe network to deliver superior gas detection via multiple hole (multi-point) sampling. The combined solution provides reliable detection of gases for occupant protection and process monitoring whilst simultaneously ensuring protection against fire threats.

Features & Benefits
Technical Data
Accessories
Documents

• Multi-point sampling provides greater coverage and increased design flexibility
• Remote sampling eliminates the need to enter the protected zone
• Centralized location saves time and money for service and maintenance
• Detector protection against environmental condition ensures reliable long-term operation
• Integral alarm status LED’s
• Integral gas port for bump test and calibration
• Field replaceable gas sensor cartridges
• Smart device application (Sensepoint App) enables faster detector commissioning, maintenance and service
• Output: 2 x configurable relays (Alarm, Fault), Modbus RTU

Delivery Info:

The VESDA Sensepoint XCL detector comes complete with the main detector unit (pre-installed with sensor cartridge), flow cap XCL-LB-CAP and elbows XCL-LB-ELB

Operating voltage	24 VDC nominal 11 to 32V DC (Analog 4-20 mA) 9 to 32V DC (Modbus) 24V AC 50/60Hz Nominal (20 to 27 VAC) 20 to 27V AC (all versions)
Maximum Power Consumption	4-20 mA: < 1.2 W (toxic), < 1.7W (CAT, CO2)
Modbus	< 0.7 W (toxic), < 1.2W (CAT, CO2)
Relay	additional 0.6 W total
Maximum Inrush Current	850 mA
Dimensions	W: 113 mm H: 113 mm D: 59 mm
Weight	500 g
Casing Material	Polycarbonate
Type of protection	IP65, Type 4 (NEMA 250)
Operating Temperature	−20 to +50 °C
Storage Temperature	0 to +30 °C
Air Humidity	0 to 99% (non-condensing)
Atmospheric pressure	90 to 110 kPa
Pipe size compatibility	Connects to ASD pipe networks 25mm, 27mm OD
Wire/Terminal size	0.5 to 1.5 mm2, 20 to 16 AWG
Output	2 Relays (24V DC / 240V AC, 5A), Modbus RTU

• XCL-LB-CAP Flow Cap
• XCL-LB-ELB 60° Elbows – pk of 4
• XCL-M20-CG Cabl Glands – pk of 10
• XCL-LB-FLT-1 Filter CAT, NH3, CO2 – pk of 10
• XCL-LB-FLT-2 Filter CO, O2, H2S, NO2, H2 – pk of 10
• XCL-LB-COV-1 Sensor Cover CAT, NH3, CO2
• XCL-LB-COV-2 Sensor Cover CO, O2, H2S, NO2, H2

Albania	English (US)
Austria	German
Bosnia and Herzegovina	English (US)
Bulgaria	English (US)
Croatia	English (US)
Cyprus	English (US)
Czech Republic	Czech
Estonia	English (US)
Greece	English (US)
Hungary	English (US)
Kosovo	English (US)
Latvia	English (US)
Lithuania	English (US)
Macedonia	English (US)
Montenegro	English (US)
Poland	Polish
Romania	Romanian
Russia	Russian
Serbia	English (US)
Slovakia	Czech
Slovenia	English (US)
Turkey	Turkish
Ukraine	Russian

Europe

Business

Nitrogen Dioxide 5 to 50 ppm, Modbus RTU, Relay

XCL-LB-NO2-RM

Features & Benefits

Technical Data

Accessories

Documents