Evaluation Unit DTS 19", 2 km

970121

Approval: VdS

As 970120, but with a 2 km detection range.
The DTS system (distributed temperature sensing) has the capacity to not only detect fires quickly, but to also detect individual fires precisely within a few meters. This is done unaffected by wind, because not only convective but also radiant heat is determined. Additionally the size and fire spread direction can be monitored over a longer period, because the sensor cable is able to withstand temperatures up to 750°C without loosing monitoring capability. The system can be easily integrated into existing management platforms (e.g. SCADA systems) by either communicating directly over Ethernet (TCP/IP) using SCPI (standard commands for programmable instruments), or Modbus.
  • Temperature monitoring with FO cable (Part No. 970150 or 970153)
  • 2 sensor channels per evaluation unit
  • Single and loop configuration possible
  • Up to 256 freely configurable alarm zones
  • Up to 5 alarm parameters per zone
  • Configuration of „negative“ alerts, which can also be used for ice warnings
  • Fiber break detection and location
  • Automatic fiber break recovery
Operating voltage10 ... 30 V DC
Weight kg approx. 9 kg
Storage temperature-40 °C ... 80 °C
Power consumption15 W @ 20 °C
Air humidity< 95 % (non-condensing)
Ambient temperature-10 °C ... 60 °C
DimensionsW: 448 mm H: 88 mm D: 364 mm 2 HU, 19"